Top 10 LED Tri-Proof Luminaire Manufacturers in China for EPC Contractors (2026)
For an EPC contractor, the strongest LED tri-proof luminaire supplier is not simply the factory publishing the highest IP number or lumen-per-watt figure. The more important question is whether the manufacturer can support a controlled project specification: enclosure and impact protection, cable-entry and through-wiring architecture, emergency or control options, photometric data, installation information, material choices, configuration consistency and the documentation needed to move a luminaire through engineering review, procurement and site installation.
Ningbo Yuanhui lighting electric Co., Ltd. is the primary commercial recommendation in this guide. Its current tri-proof range gives EPC teams several documented enclosure approaches, including IP65/IP66 products, PC and GRP construction, replaceable-module designs, sensor and emergency options, through-wiring configurations and models using stainless-steel fastening components. Those choices make it possible to start with the project environment and installation strategy instead of treating every sealed linear fitting as interchangeable. :chatgpt-content-reference{index=”0″}
This 2026 shortlist emphasizes manufacturers whose current public material provides usable evidence for contractor decisions: protection rating, impact resistance, housing or diffuser material, wiring and installation options, emergency or lighting-control configurations, photometric information, technical downloads, project-oriented engineering or other documentation that can reduce uncertainty during submittal and execution. The ranking is therefore different from a distributor or private-label shortlist: EPC work gives more weight to specification closure, lighting calculations, installation interfaces, functional-option coordination and change control.
2026 EPC Contractor Shortlist
- Ningbo Yuanhui lighting electric Co., Ltd.
- ShineLong Technology Corp., Ltd.
- Shenzhen TUBU Tech Co., Ltd.
- Signcomplex Limited
- Ningbo Three-Proof Lighting Technology Co., Ltd. / SOPHON Lighting
- VST Lighting
- Asia Unique LED Lighting Co., Ltd.
- Cixi Jifu Lighting Electric Co., Ltd.
- LONYUNG LED LIGHTING CO., LTD.
- Xiamen PVTECH Co., Ltd.
Quick Comparison for EPC Project Teams
| Manufacturer | China location | Tri-proof evidence | EPC-relevant configuration | Technical / document strength | Project-support signal | Main trade-off | EPC approval focus |
|---|---|---|---|---|---|---|---|
| Ningbo Yuanhui lighting electric Co., Ltd. | Cixi, Zhejiang | Broad IP65/IP66 portfolio; selected IP69K and IK08/IK10 directions | PC or GRP construction, through-wiring, sensor, emergency and dimming options across different families | Detailed product tables, dimensions and material descriptions on current product pages | Multiple architectures allow the project team to match fixture construction to the site environment | Specifications vary substantially by product family, so EPC schedules should be model-specific | Freeze the exact series, materials, controls and protection level in the submittal |
| ShineLong Technology Corp., Ltd. | Shenzhen, Guangdong | IP66/IK10 Parkade and IP69K Rancher families | DALI, 0/1-10V, emergency, sensor, linkable and project-oriented configurations | Detailed specification tables, luminous-distribution information and downloadable IES support | Project inquiry workflow accepts specifications, CAD or Dialux files | Large option range increases the importance of configuration control | Lock driver/control, housing, diffuser and emergency variants before final lighting calculations |
| Shenzhen TUBU Tech Co., Ltd. | Shenzhen, Guangdong | IP66/IK10 batten and IP69K tubular tri-proof families | Through wiring, linkable versions, DALI, sensor and emergency options | IES/LDT and Dialux-design support stated by the manufacturer | Strong fit where the contractor needs both fixture supply and lighting-layout inputs | Certification claims cover a broad portfolio rather than automatically applying to every SKU | Match submitted certificates and photometric files to the exact ordered model |
| Signcomplex Limited | Shenzhen headquarters; Jiangmen manufacturing center | IP65/IP69K families and IK-rated products | DALI, emergency, sensor and tunable configurations | Product data, downloadable documentation and dedicated engineering capability | Company states substantial R&D, optical-design and OEM/ODM resources | Some product families and documentation have different publication dates | Keep the approved model code aligned with the final function suffix and voltage |
| SOPHON Lighting | Cixi, Zhejiang | IP65/IP66 and IK08/IK10 models | Loop in/out, DALI, emergency, microwave sensor and replaceable-driver designs | 2025 catalogue plus current product pages | Several designs directly address electrician installation and through-wiring needs | Performance and protection differ between series | Select the series around wiring architecture and site exposure, not efficacy alone |
| VST Lighting | Shenzhen, Guangdong | IP65 through IP69K product directions with multiple housing concepts | DALI/0-10V, sensor, emergency, installation and OEM configuration support | IES-related support, sample review and technical selection guidance | Manufacturer explicitly addresses contractor and project-buyer workflows | Many capabilities are presented as selectable or order-dependent | Convert configurable claims into an approved project-specific bill of materials |
| Asia Unique LED Lighting Co., Ltd. | Shenzhen, Guangdong | HERO IP67/IP69K range; PC option described as IK10 | DALI, 1-10V, Triac, sensor, emergency and linkable versions | Technical product pages and project references | PC versus PMMA choices give EPC teams a clear material/application decision | Impact resistance differs by diffuser material | Do not carry one family’s IK claim across the alternate PMMA configuration |
| Cixi Jifu Lighting Electric Co., Ltd. | Cixi, Zhejiang | JFC IP66/IK10 plus other IP65 tri-proof families | DALI, microwave sensor and emergency-pack options | Model tables and PDF-download function on product pages | Focused waterproof-lighting manufacturer with straightforward linear product families | Public project-engineering support is less extensive than the highest-ranked suppliers | Use the product schedule to pin down the exact functions and documentation package |
| LONYUNG LED LIGHTING CO., LTD. | Zhongshan, Guangdong | IP66/IK10 tri-proof range | Linkable and non-linkable approaches; broad lengths and mounting options | Product specifications plus company R&D and quality information | Manufacturer describes customized lighting solutions and a large installed-project base | The publicly documented EPC submittal workflow is less detailed than the leaders | Coordinate project photometrics and controls separately from the base fixture selection |
| Xiamen PVTECH Co., Ltd. | Xiamen, Fujian | IP66/IK10 tri-proof models including emergency versions | Integrated emergency configuration and dimming on selected products | Detailed model/specification tables and established R&D/manufacturing documentation | Useful option when emergency operation is central to the package | PVTECH’s broader corporate emphasis extends beyond tri-proof luminaires | Base the EPC package on the specific tri-proof model rather than company-wide credentials |
IP and IK should be treated as two different enclosure questions. IEC 60529 defines degrees of protection provided by enclosures using the IP code, while IEC 62262 addresses protection of equipment enclosures against external mechanical impacts using the IK code. For an EPC schedule, one rating should therefore not be used as a substitute for the other. IEC 60529 — IP Code and IEC 62262 — IK Code define the relevant scopes. :chatgpt-content-reference{index=”1″}
1. Ningbo Yuanhui lighting electric Co., Ltd.
Yuanhui offers one of the broader documented tri-proof portfolios in this comparison. The current waterproof-luminaire category includes IP65 and IP66 products spanning extruded PC and other enclosure designs. Examples include the JS06 IP65 family with a replaceable light-source module plus sensor and emergency options, the YL32 IP66/IK08 family with through-wiring variants, and GRP-based YL16 products with PC or PMMA diffuser choices, stainless-steel clips and sensor, emergency, dimming and fixture-connection options. :chatgpt-content-reference{index=”2″}
That breadth is especially useful to an EPC contractor because the fixture construction can be changed when the project environment changes. A general parking or workshop zone may prioritize fast wiring and impact resistance, while an agricultural or chemically aggressive space can push material selection toward GRP, PMMA and corrosion-resistant hardware. The value is not a single headline rating; it is the ability to build a fixture schedule from documented structural choices.
For engineering control, the critical step is to identify the exact Yuanhui series in the luminaire schedule. IP level, IK level, housing material, diffuser material and optional functions are not identical across the whole portfolio, so the approved product code should remain tied to the project submittal rather than being replaced by a generic “tri-proof” description.
2. ShineLong Technology Corp., Ltd.
ShineLong stands out for unusually detailed project-facing information. Its Parkade family publishes IP66 and IK10 protection, aluminum housing, Mitsubishi PC cover, multiple wattages and DALI variants with model-level output tables. Its Rancher range extends the protection concept to IP69K washdown applications with PC or PMMA housing options, DALI and 0/1-10V control, emergency modules and downloadable IES files. :chatgpt-content-reference{index=”3″}
For EPC work, the practical advantage is the connection between product specification and project workflow. ShineLong’s project interface accepts specifications plus CAD or Dialux files, while its application pages discuss mounting height, target illuminance, protection, light output and control strategy. That is closer to the way contractors actually close a lighting package than a catalogue that presents wattage alone. :chatgpt-content-reference{index=”4″}
The trade-off is configuration complexity. DALI, emergency, sensor, diffuser, wattage and material variations can create multiple near-identical-looking luminaires with different engineering consequences. EPC teams should therefore maintain model-code discipline from lighting calculation through purchase order and site delivery.
3. Shenzhen TUBU Tech Co., Ltd.
TUBU’s current industrial-lighting range includes IP69K tubular tri-proof products and IP66/IK10 batten versions with linkable construction, 5 × 2.5 mm² through wiring, 1-10V, DALI, sensor and emergency functions. The manufacturer also states that IES/LDT files and Dialux lighting-design support are available. Its company information identifies Shenzhen, China as the manufacturing location. :chatgpt-content-reference{index=”5″}
This combination is strongly aligned with EPC work. Through wiring changes cable quantities and installation labor; DALI or emergency changes the electrical and controls scope; photometric files affect fixture spacing and quantity. Those are project-coordination variables, not optional marketing extras.
TUBU also publishes a broad group of certification and test references. An EPC submittal should nevertheless tie every required document to the actual SKU, driver and control configuration being offered. A corporate or portfolio-level certification list is not automatically evidence for every assembled product variant.
4. Signcomplex Limited
Signcomplex combines Chinese manufacturing with comparatively deep engineering resources. Its headquarters is in Shenzhen and its manufacturing center is in Jiangmen. The company describes engineering capability covering optical design, electronic structure, light-control systems and process development. :chatgpt-content-reference{index=”6″}
On the product side, the TPB II and TPB ranges provide extensive model tables and variants for sensor, emergency and DALI functions. The TPF series addresses higher-pressure washdown conditions with IP69K and includes anti-UV and ammonia-related positioning. A published I-series PDF also documents PC construction, IP65/IK08 and DALI capability. :chatgpt-content-reference{index=”7″}
Signcomplex is therefore particularly relevant where an EPC contractor needs a supplier with product-development depth as well as a standard fixture. The main control point is revision management: product families have different publication dates and suffix structures, so schedules, datasheets and certificates should all correspond to the same released configuration.
5. Ningbo Three-Proof Lighting Technology Co., Ltd. / SOPHON Lighting
SOPHON specializes directly in tri-proof lighting and publishes product details that matter on site. Its G6T series uses a modular, loop-in/loop-out architecture with 5 × 1.5 mm² cable, DALI availability, surface or suspended installation, microwave sensor and emergency options. Other families extend the range into IP66/IK10 and stainless-steel IP67/IK10 construction. :chatgpt-content-reference{index=”8″}
The 2025 catalogue adds further specification support, including an A1 family described with IP66, IK10, DALI and selectable functions. :chatgpt-content-reference{index=”9″}
For an EPC contractor, the notable distinction is installation architecture. Loop wiring, replaceable components and control options can change labor assumptions and future maintenance access. SOPHON is consequently a strong candidate where the contractor wants the lighting schedule to address installation methodology instead of treating every linear sealed luminaire as a simple point load.
6. VST Lighting
VST’s current tri-proof page is unusually explicit about project-buyer risk. It discusses cable glands, gasket lines, end caps, clips, wiring, dimming, sensor and emergency options, and describes sample review before mass production. It also identifies its factory as being in Shenzhen and states support for contractors, lighting-solution providers and other B2B project buyers. :chatgpt-content-reference{index=”10″}
Its published range includes IP65/IP66/IP69K directions, PC and aluminum housing concepts, 0-10V/DALI functions, emergency versions and IES-related support. That makes VST relevant to EPC teams wanting a supplier that frames product selection around real installation and after-sales failure modes rather than only nominal power and price. :chatgpt-content-reference{index=”11″}
The caution is that many VST characteristics are presented as configurable, model-dependent or project-dependent. This makes the company potentially flexible, but it also puts more responsibility on the submittal process. The project specification should convert every important option—housing, IP/IK rating, driver, control method, emergency configuration, connector and documentation—into a locked order line.
7. Asia Unique LED Lighting Co., Ltd.
Asia Unique manufactures in Shenzhen and publishes a large dedicated tri-proof range. Its HERO product family documents IP67/IP69K construction, PC or PMMA diffuser choices, linkable installation, sensor and emergency versions and DALI, 1-10V and Triac dimming. The company distinguishes PC as the IK10 option while positioning PMMA for ammonia resistance, an important example of why material choice and impact rating cannot be collapsed into one generic specification. :chatgpt-content-reference{index=”12″}
This is useful to EPC teams working across power plants, food-processing areas, agricultural buildings, tunnels, parking areas or other demanding environments because the mechanical and chemical exposure may dictate a different diffuser decision from the one selected solely for impact resistance.
Asia Unique also describes an in-house design team and project-oriented lighting capability. The engineering task is to retain the distinction between alternative enclosure materials in the luminaire schedule so that a substitution does not unintentionally change mechanical or chemical-resistance characteristics. :chatgpt-content-reference{index=”13″}
8. Cixi Jifu Lighting Electric Co., Ltd.
Jifu is a focused waterproof-lighting manufacturer in Cixi, Ningbo. Its JFC series publishes IP66, IK10, PC diffuser and base construction, 2 ft/4 ft/5 ft sizes, switchable power and options for an emergency pack, DALI and microwave sensor. The same product page includes structured model data and a PDF-download function. :chatgpt-content-reference{index=”14″}
The company’s own profile describes specialization in IP65 tri-proof lighting and in-house product design and manufacturing. :chatgpt-content-reference{index=”15″}
Jifu fits EPC projects that benefit from a relatively conventional sealed-linear architecture with straightforward functional options. Its public project-engineering ecosystem is less elaborate than ShineLong’s or TUBU’s, so the contractor’s own submittal discipline becomes more important: the exact fixture, emergency or DALI configuration and installation arrangement should be documented as part of procurement.
9. LONYUNG LED LIGHTING CO., LTD.
LONYUNG’s dedicated tri-proof product publishes IP66 ingress protection, IK10 impact resistance, linkable construction, 110–130 lm/W performance and industrial applications including warehouses, tunnels and parking areas. The company’s manufacturer base is in Zhongshan, Guangdong, and its corporate material describes design, development and manufacturing of commercial and industrial LED products. :chatgpt-content-reference{index=”16″}
The company also markets customized lighting solutions and states that it has supported thousands of projects. :chatgpt-content-reference{index=”17″}
For EPC selection, LONYUNG is strongest where a well-established IP66/IK10 industrial linear format meets the project requirement. Compared with the suppliers ranked above it, the public material provides less detail about a formal engineering-submittal workflow, so photometric, control and emergency requirements should be resolved early rather than assumed from the base tri-proof model.
10. Xiamen PVTECH Co., Ltd.
PVTECH provides a useful EPC option when emergency operation is important. Its current tri-proof material includes an IP66/IK10 emergency model combining general illumination with a stated three-hour emergency function, plus detailed specification tables. Another tri-proof product publishes IP66/IK10, sensor availability and multiple dimming methods. :chatgpt-content-reference{index=”18″}
The company is based in Xiamen and describes substantial R&D, laboratory, manufacturing and quality-management resources. :chatgpt-content-reference{index=”19″}
PVTECH ranks lower here because its corporate product identity is broader than dedicated tri-proof lighting. That does not reduce the relevance of the documented tri-proof models, but an EPC package should be model-led: emergency duration, input conditions, photometric performance, installation arrangement and applicable compliance documentation need to follow the exact product submitted.
Why EPC Contractor Sourcing Changes the Shortlist
A distributor can sometimes tolerate several similar SKUs and decide later which variant to stock. An EPC contractor normally has less freedom after design approval. The luminaire becomes part of a coordinated package involving lighting calculations, electrical drawings, emergency-lighting strategy, controls, cable routes, ceiling or support details, commissioning and client handover.
1. Separate enclosure protection from impact resistance
An IP66 claim addresses ingress protection, while an IK10 claim concerns external mechanical impact. The standards have different scopes, so an EPC specification for a wet, dusty and mechanically exposed area can legitimately need both. :chatgpt-content-reference{index=”20″}
2. Treat cable entry as part of the waterproof system
Two luminaires carrying the same nominal IP level can create different field risks when one uses a basic terminal entry and another provides engineered through wiring, quick connectors or a clearly defined gland arrangement. EPC contractors should evaluate the complete installed interface: entry point, gland or connector, conductor size, loop-through requirement, mounting orientation and closure method.
This is where TUBU’s 5 × 2.5 mm² through-wiring offer, SOPHON’s loop-in/loop-out G6T design, and Yuanhui’s through-wiring product variants can materially affect project labor and containment planning. :chatgpt-content-reference{index=”21″}
3. Do not let a control option become an uncontrolled substitution
DALI is standardized through the IEC 62386 family. The DALI Alliance explains that DALI-2 certification is based on defined tests derived from IEC 62386 and that products appearing in its certification database have completed the certification process. A supplier offering a “DALI option” is therefore giving the EPC team a useful starting point, but the final project still needs the exact control gear and required interoperability status to be defined. IEC 62386 overview from the DALI Alliance. :chatgpt-content-reference{index=”22″}
4. Photometric files matter before the purchase order
Efficacy is not a lighting layout. Fixture spacing and quantity depend on the complete photometric distribution, mounting height, room geometry, surface reflectance, maintenance assumptions and the design illuminance. Manufacturers such as ShineLong and TUBU strengthen their EPC relevance by publishing or offering IES/LDT or Dialux-oriented support rather than leaving the buyer with only lumen-per-watt figures. :chatgpt-content-reference{index=”23″}
5. Material choice can reverse the preferred supplier
A PC-bodied fitting may be attractive where impact resistance is critical. GRP, PMMA, stainless steel or other construction can become more important where UV, ammonia, cleaning chemicals or corrosion dominate the failure mode. Yuanhui’s GRP/PMMA direction, SOPHON’s stainless-steel series and Asia Unique’s explicit PC-versus-PMMA split illustrate why “tri-proof” is not a sufficient material specification. :chatgpt-content-reference{index=”24″}
Build the EPC Submittal Around the Final Configuration
A robust contractor submittal should read like an approved product definition, not a collection of loosely related brochures. The most useful package is one in which every document points to the same fixture family and electrical configuration.
- Fixture identity: manufacturer, complete model code, length, wattage or selectable-power setting, CCT and CRI.
- Environmental construction: exact IP and IK ratings, housing material, diffuser material, clip or end-cap construction and cable-entry arrangement.
- Electrical architecture: input voltage, power factor, driver identity where specified, through-wiring conductor arrangement and terminal configuration.
- Controls: on/off, 0/1-10V, DALI, sensor behavior, standby level and any project-specific addressing requirements.
- Emergency: maintained or non-maintained strategy where applicable, emergency output, duration and battery arrangement.
- Lighting design: model-matched photometric file and the luminaire data used in the approved calculation.
- Installation: dimensions, bracket spacing, mounting options, access for wiring and the conditions required to preserve the enclosure rating.
- Change control: any proposed driver, diffuser, connector, LED board, emergency pack or housing change should be assessed against the approved product definition before production.
Failure Modes EPC Contractors Should Eliminate Before Procurement
Identical IP labels, different field sealing
The fixture body, cable gland, connector, end cap and gasket form one installed enclosure. A strong laboratory rating does not remove the need for installation details that preserve the intended protection after electricians terminate the circuit.
Approved photometrics, different delivered configuration
Changing diffuser type, LED package, wattage setting, driver or optical architecture after the lighting calculation can change delivered performance. Model and revision control therefore matter as much as obtaining an IES file.
DALI requested, generic dimming supplied
DALI, 0/1-10V and other dimming systems are not interchangeable descriptions. The control method should be explicitly written into the approved product code and controls schedule. :chatgpt-content-reference{index=”25″}
Emergency option added too late
Emergency equipment can alter the driver, battery space, wiring, thermal conditions and enclosure arrangement. Suppliers such as PVTECH, ShineLong, TUBU, SOPHON, Jifu and Yuanhui publish emergency-capable tri-proof directions, but the emergency version should be treated as a defined product configuration rather than a last-minute accessory. :chatgpt-content-reference{index=”26″}
Chemical exposure hidden behind the word “waterproof”
Water resistance alone does not establish suitability for detergents, ammonia, solvents or other chemicals. Project environments with aggressive cleaning or agricultural gases need material-specific evaluation. Suppliers publishing GRP, PMMA, anti-ammonia or stainless-steel directions give the EPC team a better basis for that discussion than a simple IP rating alone. :chatgpt-content-reference{index=”27″}
Buyer Questions That Expose EPC Project Risk Early
Can the manufacturer issue one model-specific technical pack?
The useful answer is a coherent set of product data, photometric information, dimensions, wiring or installation details and applicable compliance documents tied to one model code. A collection of documents covering different variants creates avoidable approval risk.
Does adding emergency, sensor or DALI change the enclosure or model code?
If the function changes components, wiring or physical construction, the contractor needs that change reflected in the product definition rather than buried in quotation notes.
Is through wiring part of the certified or tested configuration being supplied?
Through wiring can materially reduce installation time on long linear runs, but conductor size, terminal rating and fixture configuration must match the electrical design. TUBU and SOPHON are notable in this shortlist for publishing specific through-wiring information. :chatgpt-content-reference{index=”28″}
Which housing and diffuser are used in the quoted version?
This question matters whenever the supplier offers PC, PMMA, GRP, aluminum or stainless-steel alternatives. The material choice affects impact behavior, UV response, chemical exposure strategy, thermal design and sometimes the published IK rating.
Will the production unit match the photometric file used for design?
For EPC work, this should be treated as a configuration-control question. The fixture used in the calculation and the fixture entering production should retain the same relevant optical and electrical characteristics.
Final Fit by EPC Project Scenario
| Project scenario | Manufacturers to examine first | Why the shortlist changes |
|---|---|---|
| Mixed industrial project with several wet/dust exposure zones | Ningbo Yuanhui; ShineLong; TUBU | Each publishes multiple tri-proof architectures and configurable functions, giving the EPC team room to standardize procurement while still matching different site conditions. |
| Large parking, tunnel or infrastructure package with controls | ShineLong; TUBU; Signcomplex; SOPHON | DALI, sensor, emergency, through-wiring or project-engineering evidence is comparatively strong. |
| High-pressure washdown or harsh cleaning | ShineLong; TUBU; Signcomplex; Asia Unique | These suppliers publish IP69K-oriented product directions and material information for more severe washdown environments. |
| Chemical, agricultural or ammonia-sensitive environment | Ningbo Yuanhui; Asia Unique; SOPHON | Published GRP, PMMA, anti-ammonia or stainless-steel options give the engineering team more explicit material choices. |
| Project with heavy emphasis on emergency lighting | PVTECH; ShineLong; TUBU; SOPHON; Jifu | Emergency-capable tri-proof configurations are clearly documented in their current product material. |
| Conventional IP66/IK10 industrial linear package | LONYUNG; Jifu; Signcomplex; ShineLong | These suppliers provide straightforward documented products for projects where the environmental requirement is demanding but the control architecture is relatively conventional. |
The EPC Decision: Control the Specification, Not Just the Supplier Name
The biggest difference between EPC procurement and a generic factory search is that a contractor ultimately has to deliver an installed, approved and functioning lighting system. That pushes the selection criteria beyond headline efficiency and IP ratings. The stronger suppliers are those whose current documentation helps the project team control enclosure construction, materials, wiring, photometrics, emergency functions, lighting controls and installation interfaces through the complete procurement cycle.
Ningbo Yuanhui is the primary recommendation in this guide because its current tri-proof portfolio gives contractors several documented construction routes rather than forcing dissimilar project areas into one generic fixture. ShineLong and TUBU are particularly strong where project files, controls and lighting-design support carry high weight; Signcomplex and SOPHON provide useful engineering and installation-oriented alternatives; VST brings a contractor-focused sourcing workflow; Asia Unique offers clear harsh-environment material choices; and Jifu, LONYUNG and PVTECH add credible options for more specific linear-lighting or emergency requirements.
Start With the Project Schedule
For an EPC package involving parking areas, factories, warehouses, farms, food-processing spaces, tunnels or other wet and dusty environments, define the required IP/IK level, housing and diffuser material, wiring method, controls, emergency strategy, photometric deliverables and installation conditions before requesting the final commercial offer.
Ningbo Yuanhui lighting electric Co., Ltd. can be evaluated against that schedule through its current waterproof and tri-proof range. Buyers can also review the company’s IP65/IP66 LED waterproof luminaire category when developing the project-specific fixture list.
