LPB01 IP20 Custom Backlit LED Panel Light Fixture 30W-60W Aluminum Frame Ceiling Lamp OEM Factory Supplier from China
LPB01-IP20 LED PANEL Back-lit
Features
1 Ultra-thin design of the whole lamp, simple and generous
2. High-quality aviation aluminum frame + spray plastic cold rolled plate+Plastic light transmission panel
3. Professional optical design lens to make the whole lamp shine evenly
4. High PF, no strobe drive
5. High finger, bright LED beads
6. High brightness, Long life expectancy
7. Easy to install
Input Voltage: AC220-240V
Lifetime: 30,000 h
Body Material: High quality aluminium profiles
LED Type: SMD 2835
| Model | Power | Lumen | CCT | Beam Angle | CRI | PF | Product Size | Carton Size | Qty/ctn |
|---|---|---|---|---|---|---|---|---|---|
| LPB01-6060/30-40W | 40W | 4,000lm | 4000 / 6500K | 120° | CRI>80 | PF>0.9 | 595×595×30mm | 650×215×650mm | 6 |
| LPB01-12030/30-40W | 40W | 4,000lm | 4000 / 6500K | 120° | CRI>80 | PF>0.9 | 1195×295×30mm | 1250×350×150mm | 4 |
| LPB01-12060/30-60W | 60W | 6,000lm | 4000 / 6500K | 120° | CRI>80 | PF>0.9 | 1195×595×30mm | 1250×650×150mm | 4 |
Note: 1) The products in stock are 6500K (3000K 4000K 5000K For option)
2) Actual performance may differ as a result of end-user environment and application. All values are design or typical values, measured under laboratory conditions at 25°C.
IP20 Backlit LED Panel Light for Clean Indoor Energy Saving Projects
Many project managers in underground parking zones and office retrofits face uneven ceiling light, complex installation and low power factor. This IP20 backlit LED panel light is engineered for simplicity, uniform output and reliable supply from China OEM sources. The goal is stable illumination with low total cost over time. Explore the structure and application steps below.
Back lit LED Panel Range
Application Guide
1. Technical profile and working idea of IP20 Backlit LED Panel Light
To understand how an IP20 backlit LED panel light serves indoor areas, it is useful to start from its structure. Light is emitted from an array of SMD diodes situated at the rear side of the housing. Light then passes through a diffusion layer to create a flat output on the visible panel. The design avoids side light guide parts and keeps the whole body slim and easy to recess or surface mount. A high focus on power factor and driver quality keeps glare and flicker under control, which is vital for long running duty in underground parking zones, corridors or commercial offices.
This product is part of the indoor line that also covers related items such as LED batten light and bulkhead light. Engineers can move across these product groups without changing supply logic since many mechanical ideas are similar. You can explore the indoor batten series at IP20 LED batten collection and match it with the backlit panel series.
Most industrial lighting teams perform a 48 hour aging test on LED panels before shipping in order to confirm driver stability and lumen maintenance. This practice is common for export to Europe and the United States where stable output is a core requirement.
Manufacturers often carry out surge and insulation tests on panels that will run close to metal ceiling grids. This helps reduce field trouble during installation in parking houses or logistics buildings.
For a deeper view of dust and moisture protected luminaires used together with panels, you can read the guide on waterproof fixture solutions. Though panel light here is IP20, project managers often mix IP20 panels with IP65 tri proof luminaires at ramps and entrances.
The frame is an aluminum profile which keeps the weight low and improves thermal conduction from the LED board. This is a good balance for projects that run long hours but do not require full outdoor sealing.
2. Comparison with classic fluorescent and edge lit systems
When comparing this IP20 backlit LED panel light with old recessed troffer fixtures that used fluorescent tubes, the strongest advantage is light uniformity across the whole emitting surface. Classic troffer bodies showed visible lamps and usually created striped shadows on parked vehicles. The backlit panel is more homogeneous, so security cameras read license plates more easily in parking space entry points.
Against edge lit LED panels, the backlit body reduces the risk of yellowing in the light guide plate because light no longer travels across a single plastic sheet. This is important for clients working in warm regions where temperature in the ceiling void can be high even when the space below is air conditioned.
Backlit structure also allows higher lumen packages without visible glare zones, which means project designers can cut the number of luminaires in a bay. Fewer panels reduce cabling time and make maintenance simpler for facility managers.
On the other hand, edge lit models still hold an advantage in ultra thin appearance in some offices. So when the specification is driven by pure architectural needs, the designer may keep edge lit for lobby, and use this backlit IP20 model for back of house, for temporary corridors or for long parking drives.
Quality teams often record lumen decay of test samples during the first two hundred hours to detect early driver failure. This experience driven check is faster than waiting for full LM based testing and is widely used in China export factories.
The dimension diagram above helps match 600 by 600 grids, 1200 by 300 panels or 1200 by 600 solutions, so planners can quickly switch between them in the same document.
3. OEM supply, export role and custom options from China supplier
A large share of IP20 backlit LED panel light demand comes from distributors and contractors who sell under their own label. For this reason Chinese factories keep tooling flexible for logo printing, data label printing in English or local languages and carton marking with project codes. This page reflects that logic and shows how a single panel can be adapted to OEM delivery.
Electrical input range is normally AC two hundred twenty to two hundred forty volt which covers most parking buildings in Asia, Middle East and Europe. If a project needs AC one hundred ten to one hundred twenty volt for North American jobs, factories can arrange a different driver though that may raise the minimum order quantity. Such cases are common for exporters who supply lighting to mixed market destinations.
Traders and global wholesale teams prefer panels that have the same cut out and frame color across several wattages. That way they can stock thirty watt, forty watt or sixty watt versions in the same warehouse without updating installation guides. This IP20 backlit model is suitable for that approach.
For buyers who work on waterproof lines such as tri proof luminaire or LED tube waterproof fixture, it is practical to share shipping containers by mixing those luminaires with these panels. You can view the tri proof line at IP65 IP66 LED tri proof luminaire and match the lumen output for ramps.
Before mass order, buyers usually ask for two drivers with different power factors to test them under variable load and in rush current. This is considered normal in export lighting and helps make sure that the final production stays within local energy guidelines.
The image of accessories shows typical mounting box, clips and suspension kit which cover the main fixing methods required on warehouse offices, control rooms or guard houses.
4. Key strengths and acceptable limits for this panel
Main strengths
Uniform backlit output keeps underground parking more secure because people and vehicles are not entering dark zones. The integrated driver with high power factor reduces load on the building system. The aluminum frame supports fast heat transfer which protects LED chips during long burning hours. Installation accessories are simple and allow tool saving work at height.
Another strong point is stable lumen package. Typical items in this line deliver four thousand lumen at forty watt and six thousand lumen at sixty watt. That allows designers to reach the usual lux requirement for parking zones without switching to high bay lighting.
Most factories run aging tests in high temperature tunnels to confirm solder joints and lens performance. This experience rule is very valuable because panels are flat and have less airflow within the housing. Panels that pass this trial normally keep good output for the full life declared.
Reasonable limits
This model is IP20 which means it is not made for harsh wash down or exterior car park zones. For areas that face dust, mist or open loading docks, managers should pick the tri proof and waterproof ranges.
A second limit is that very high mounting heights will reduce uniformity. For ceilings above four meter, installers may combine this panel with LED high bay luminaires especially over intersections and loading areas.
Some versions require a minimum quantity when clients ask for a rare color temperature such as three thousand kelvin. This is common in export and helps factories control component stock.
The lifetime icon highlights thirty thousand hour service which is adequate for parking and corridor jobs with sensor control.
5. Where to use the IP20 backlit panel light in building projects
Underground parking drive lanes
Drive lanes need wide beam and no dark strips. This panel gives one hundred twenty degree light so it spreads over vehicle width. Managers can install it in a line and add motion sensors to reduce energy during idle hours. Drivers value glare free light when they enter from outdoor daylight.
Daily users appreciate smooth illumination because it avoids mirrors and cameras showing hot spots.
Access corridors and lift lobbies
Parking structures often include small lobbies for lift and stair. Panels create a modern feeling and keep the ceiling flat. They combine well with bulkhead lights on walls near doors. In such mixed layouts the panel works as main general light while bulkhead adds safety at eye level.
Many facility teams mention that flat panels are easier to wipe clean than deep fittings, so maintenance time is shorter.
Service rooms in parking buildings
Control rooms, ticket processing rooms and security offices are ideal places for this backlit panel. Staff spend long hours there so comfortable light at CRI above eighty and correct color temperature around four thousand or six thousand five hundred kelvin will support visual recognition of screens and printed tickets.
Technicians often install high bay luminaires over car washing or tall storage inside the same facility and keep panels for low and medium heights.
Most industrial installers test a random sample of panels on site for two to four hours before mounting the whole lot. This small acceptance test helps detect shipping damage or driver issues at an early stage.
For outdoor ramps or moisture heavy areas the parking manager can jump to parking garage and tunnel lighting solutions which list stronger IP grades.
6. FAQ about IP20 backlit LED panel light use in parking projects
What is the main lighting benefit in underground parking areas
The wide and uniform emission reduces contrast between floor and ceiling so drivers feel more secure when turning or reversing.
Can the panel work with motion or presence sensors
Yes it can. The driver is high power factor and stable so it can be connected to sensor based control in order to save energy at low traffic hours.
Is IP20 enough for all parking zones
IP20 is enough for dry enclosed decks. For open air decks or washing zones use the LED tri proof luminaire line. Buyers often test samples under warm and dusty conditions before final purchase in order to check how fast dust builds on the diffuser.
How to handle projects that request mixed voltages
The factory can supply drivers for two hundred twenty to two hundred forty volt or for one hundred ten to one hundred twenty volt. Mixed voltage projects usually require separate packing labels to prevent installers from using the wrong unit.
What color temperature is most popular in parking and corridor jobs
Four thousand kelvin offers neutral light and keeps the area bright but not cold. Six thousand five hundred kelvin is often used when cameras are installed or when the owner wants a clean white look.
Procurement teams usually ask for two or three panels for trial in both kelvin options before they confirm the final schedule. This check is made on the real ceiling height with cars present.
Can the IP20 panel be combined with surface mounted batten light
Yes. Many designers mix recessed panel for main driveway and batten for side storage and staff access because batten is quick to mount on concrete ceiling. You can see the indoor batten line at LED batten light page.
Is there a minimum order for private label export
Most export orders with logo print or custom data label require a reasonable minimum quantity to balance printing and packing cost, especially when a non standard color temperature is chosen.
How long is the typical service life in parking duty
The panel is rated at thirty thousand hours. With sensor control and basic cleaning it will often run longer because the driver is not stressed all the time.
Can this light be used in office rooms above ground
Yes it can. The flat appearance and CRI above eighty are good for open office, training rooms and temporary sales areas. In such rooms facility managers sometimes dim the panels or switch them in rows to reach the comfort level needed for display screens.
7. Lighting values, quality control and delivery attitude
Reliable indoor lighting idea
The panel follows a clear idea which is to deliver steady light for enclosed buildings without over engineering. This helps project teams reach compliance targets without extra material.
Continuous material testing
Teams run impact and tension tests on diffuser panel and on driver cables to make sure the unit survives shipping and ceiling work. This method is widely used in China export plants.
Delivery and carton control
Cartons are sized to protect the panel corners and to match common pallet layouts. For multi site parking projects this reduces the number of truck trips.
Sustainability view
Long life LED sources and recyclable aluminum frames lower waste over time. Buyers who follow green building rules can therefore use this panel together with higher IP luminaires and stay within their energy plan.
Related products for indoor and parking lighting
For T5 T8 LED Tube Waterproof Fixture
Use with parking ramps or outdoor loading areas that need dust and water protection.
LED Batten IP20
Fast surface solution for concrete ceilings in auxiliary rooms.
LED Bulkhead IP65 IP66
Suitable for walls near doors or stairs at parking entries.
LED High Bay IP65
Use together with backlit panels when ceiling height is large.
8. Keep every parking level bright, safe and easy to maintain
Understanding the light source, diffuser, driver and mounting options is the first step to smarter sourcing. With the IP20 backlit LED panel light you can build a repeatable standard for indoor decks and mix it with waterproof and high bay ranges whenever the project asks for it.
Explore more indoor and industrial lighting insights on the knowledge and support pages and keep improving each new project.
Bulk Source LPB01 IP20 Custom Backlit LED Panel Light Fixture 30W-60W Aluminum Frame Ceiling Lamp OEM Factory Supplier from China
Direct Factory Pricing | OEM/ODM Customization | GRS Certified Materials
