YL19-IP20 Aluminum LED Batten

Features

1. YL19 series range of LED product can be used to replace traditional LED luminaires with floure scent lamps

2. The process of selecting, installing and maintaing is so easy

3. Luminaire that works with Interact Pro lighting siftware and Interact Ready devices

4. To provide a connected lighting system for SMEs.

Input Voltage: AC220-240V

Lifetime: 50,000 h

Body Material: Aluminum

LEDType: SMD2835

Driver Brand: PHILIPS

Operating Temperature: -40°C to +40°C

Model	Power	Lumen	CCT	Beam Angle	CRI	Product Size	LF	Carton Size	Qty/ctn
YL19-20W-600(A)	20W	2800lm	3000K – 6500K	120°	>80	630×47×74mm	550mm	675×335×280mm	20pcs
YL19-35W-1200(A)	35W	4900lm	3000K – 6500K	120°	>80	1230×47×74mm	1150mm	1275×225×260mm	12pcs
YL19-50W-1500(A)	50W	7000lm	3000K – 6500K	120°	>80	1530×47×74mm	1450mm	1575×225×260mm	12pcs
YL19-20W-600(B)	20W	2800lm	3000K – 6500K	120°	>80	630×60×74mm	550mm	675×335×335mm	20pcs
YL19-35W-1200(B)	35W	4900lm	3000K – 6500K	120°	>80	1230×60×74mm	1150mm	1275×270×290mm	12pcs
YL19-50W-1500(B)	50W	7000lm	3000K – 6500K	120°	>80	1530×60×74mm	1450mm	1575×270×290mm	12pcs

Note: Actual performance may differ as a result of end-user environment and application. All values are design or typical values, measured underlaboratory conditions at 25°C.

IP20 Aluminum LED Batten Light engineered for indoor productivity

Many project owners in food processing lines, distribution halls, technical corridors or service tunnels want a linear LED batten that keeps lumen uniformity stable, wiring simple and service life long under continuous operation. This IP20 aluminum LED batten light promises dependable output, quick through wiring and mounting friendly structure so installers finish faster. Below is a complete guide written for buyers who evaluate factory supply, OEM batches and indoor modernizations. Explore how the structure, optics, wiring and export ready manufacturing come together.

LED Batten Category
Manufacturing Strength

1. About the IP20 aluminum LED batten light for OEM lighting brands

The IP20 aluminum LED batten light is a linear surface or suspended fixture that replaces fluorescent battens in indoor corridors, workshops, utility rooms and conditioned food processing areas where dust and water exposure is limited. The housing uses an extruded aluminum body to improve thermal transfer which means SMD2835 light sources can run at the recommended temperature and maintain lumen flux for a long lifetime of 50000 h. A dedicated driver brand such as PHILIPS is often specified to keep flicker control and safety approvals reliable across export markets.

The YL19 range supports traditional lengths so procurement teams can match current drawings. Power steps are 20W 35W 50W, corresponding to 600 mm 1200 mm 1500 mm forms. CCT ranges from 3000K to 6500K so one family covers warm retail aisles and cool inspection work bays. Beam is 120 degree so racks, prep tables and loading docks receive wide coverage without complex aiming. Installers can select through wiring accessories when the lighting line must pass power along in a straight run.

Manufacturers serving food processing or clean preparation zones often perform dielectric strength tests, thermal rise inspections and 48 hour aging runs so every batch will pass local safety checks once it arrives in the importer warehouse. During production the distance between LED board and diffuser is kept consistent to avoid bright dot effect that sometimes appears in lower spec battens. Installers appreciate predictable screw positions which reduce labour cost.

The product sits inside the broader indoor portfolio that also includes items such as LED bulkhead for utility zones at LED bulkhead IP65 IP66 and vapor tight linear luminaires for harsher washdown halls at LED tri proof luminaire. Understanding the relation between these families helps planners choose the right ingress level.

Manufacturers often perform tensile or impact tests on mounting clips or cable glands to ensure consistent quality before mass packing so that repeat export customers receive identical fixtures.

The visual mark above shows the core feature mix. IP20 indicates it is aimed at dry location indoors. The wide temperature scope from minus 40 degree to plus 40 degree allows northern or refrigerated logistic bases to still use the same batten line. A grounded symbol reflects safe metal body construction for projects that require earthing continuity along continuous runs. The life mark confirms the long service period when operated under 25 degree test environment.

2. Key strengths and realistic limits of this indoor aluminum batten

This section analyses why many buyers move away from plastic battens or retrofitted T8 tubes and choose an integrated IP20 aluminum LED batten light. It is written for importers, engineering contractors and brand owners who design product lines for supermarkets, food packaging rooms, stations and institutional buildings.

High thermal reliability from extruded aluminum housing

Aluminum channels pull heat away from the SMD2835 LED board which keeps junction temperature lower. When the board does not overheat, lumen depreciation follows the L70 expectation closer to 50000 hours and color shift stays within acceptable corridors. In ongoing projects suppliers often run a 48 hour burn in to screen out early driver failures which is a common SEE practice in LED manufacturing.

Fast selection installation and maintaining workflow

The original specification from the product sheet states that selection, installing and maintaining are kept simple. This means end users meet only a few length and wattage choices, terminals are accessible under a removable front cover, and cleaning can be done without removing the entire fitting. Food warehouses that operate twenty four hours benefit from such maintainability because shutting down a rack aisle is costly.

Compatible with modern control platforms

The description mentions operation with Interact Pro lighting software and Interact ready devices which shows the fixture can be integrated in a connected lighting system for small and medium enterprises. For European or Asia Pacific integrators this is very useful because they can sell the same batten into either standalone lines or digitally supervised projects.

Durable driver selection from recognized brands

Using a PHILIPS driver brand inside an aluminum batten is a sign of export maturity. International buyers like to see a driver that is known for consistent output, short circuit protections and low flicker metrics. During quality control many factories record driver serial or lot codes so they can trace any issue identified by the distributor months later.

Limitations to keep in mind

The IP20 rating means the luminaire is not suitable for wet washdown areas, meat cutting rooms with regular hose cleaning, marine environments or outdoor under canopy zones. For these sites facility planners should move to a sealed tri proof range. The 120 degree beam is excellent for general illumination but where higher lux is needed on deep worktops a reflector or higher ceiling wattage may be required. For very design driven interiors where a seamless light line is expected, recessed linear systems could be visually better.

Most industrial fixtures undergo a thermal stability and ground continuity test before packing which is an accepted engineering practice in export ready linear lighting.

3. Comparison versus fluorescent and vapor tight linear fittings

In many food processing plants the basic reference is still a twin 18W or twin 36W fluorescent batten which used to be economical but carried high maintenance and low power factor ballasts. The IP20 aluminum LED batten light delivers 2800 lumen at 20W and up to 7000 lumen at 50W which is a significantly better efficiency compared to fluorescent. Since the beam is wide installers can often reduce fixture count across a hallway or inspection table zone.

Against full IP65 tri proof luminaires the IP20 batten is lighter, easier to open for wiring and cheaper to transport. Tri proof gear is thicker and slower to mount which is justified only in wet, dusty or corrosive bays. In clean dry lines the IP20 batten keeps the ceiling lighter and more architectural. Where both types exist supervisors can match color temperature across the portfolio by selecting 3000K to 6500K range.

Older plastic battens depend on snap in covers that turn yellow over time due to UV and heat. Aluminum bodied battens resist this age effect and keep industrial spaces bright. Some projects in large canteens or prep rooms require extended ambient temperature span. The minus 40 degree to plus 40 degree operating window of this model allows such projects to keep a single item code even when cold rooms and normal rooms are illuminated by the same family.

Energy auditors sometimes evaluate maintenance cost instead of only wattage. With this batten the 50000 hour life and integrated driver remove the periodic tube replacement activity so facility teams can focus on higher value tasks.

Understand more about quality control, driver efficiency and service life logic through the lighting knowledge pages at energy efficiency and performance testing to support future tenders.

4. Manufacturing, OEM and China supply capability for IP20 batten

Project buyers who operate private label or regional brands often need the same technical core yet different print, carton or plug formats. The linear format of this IP20 aluminum LED batten light makes OEM adaptation straightforward because the extrusion, tray and diffuser are modular. Wattage can be tuned through driver setting and LED board population so 20W to 50W coverage is achievable without redesign.

China based suppliers usually offer through wiring TW options for long production floors which is shown in the wiring diagram image below. This kind of factory level prewiring shortens onsite cabling and reduces risk of bad joints when the project is executed in remote locations. The connector compartment is wide enough to accept standard three wire terminals and ground connection.

During OEM cycles buyers often request extra temperature tests because food related processing may run at low ambient or close to freezing. Consistent heat sink mass and high grade diffuser help the batten survive these tests. Most factories also perform insulation resistance and earth continuity on random samples which forms part of the SEE standard experience expression. Buyers often compare two different driver batches before giving green light to a full export shipment, especially when European importers want flicker metrics that suit sensitive workers.

To study typical production and certification routes for waterproof and IP rated products refer to the internal resource pages such as quality assurance and certifications or factory tour. Even though the current model is IP20 most of the manufacturing discipline is shared.

Export ready suppliers pack shorter 600 mm models in 20 piece cartons and longer 1200 mm or 1500 mm models in 12 piece cartons which optimizes container cubic. Carton sizes are commonly 675 by 335 by 280 mm for the 20W form and larger for the 35W and 50W forms. Such fixed sizes help distributors plan warehouse shelving.

Most industrial fixtures undergo a two stage aging that combines room temperature soak and high temperature soak so that driver and LED board stabilize before leaving the plant. This contributes to lower failure rate in the first months after installation.

5. Application stories and layout ideas for indoor food related spaces

Below are realistic use cases where the IP20 aluminum LED batten light offers strong balance between cost, appearance and ease of maintenance. Each example combines one of your provided images with indoor usage text so that content and media alternate as requested.

Linear runner lighting above packaging conveyors

Food packaging lines rely on long straight conveyors where workers need vertical and horizontal visibility. The 120 degree beam and 630 mm to 1530 mm sizes shown in the diagram allow designers to place fixtures in sequence so that overlap is even. When all battens in a line use the same diffuser height, ceiling looks tidy and inspectors can easily see contamination or dust. Daily users often mention that such aluminum housings resist minor knocks from tool handling much better than pure plastic bodies.

See more about typical warehouse and logistics lighting ideas at warehouse and logistics lighting.

Daily users appreciate the smooth illumination and the fact that the front cover can be opened without carrying special tools.

Service corridors and technical rooms inside plants

Service corridors, control rooms, water treatment booths and compressor spaces often need reliable but not wet rated lights. This IP20 aluminum batten is ideal here because it brings 2800 to 7000 lumen options without the higher price of sealed luminaires. Power supply located inside an aluminum channel dissipates heat even in tighter rooms. Maintenance teams can tap through wiring to feed downstream runs creating uniform light without messy junction boxes.

Many maintenance departments note that testing an IP20 batten on a bench is quicker than testing a sealed IP65 tube because access to terminals is direct. This saves labor across long term operation.

Buyers usually test samples under different temperature conditions before mass order which is very important because food processing spaces can vary from chilled docks to warm prep kitchens.

Retail cold chain rooms attached to production zones

Some plants operate showrooms, tasting rooms or cold chain distribution spaces next to production. They require neat looking luminaires that match the brand impression yet survive lower ambient. The IP20 aluminum LED batten light with minus 40 degree starting range fits well here. Lumen output of 4900 for 35W version is bright enough for small display aisles.

Explore the broader IP20 LED batten listings for matching forms at IP20 LED batten product category.

Many international buyers who ship to Africa or South America appreciate that the fixture uses a well known driver because local electricians can quickly test or replace it without long sourcing time.

6. Values, service logic and lighting portfolio links

Modern industrial lighting is no longer a single product decision. It is a portfolio decision. This IP20 aluminum LED batten light fits in between high protection tri proof products and more decorative panel lights. For buyers who need to cover multiple areas in one tender, below cards show how the supplier positioning can satisfy different lighting zones across the same factory or campus.

Stable quality mindset

Every linear batten batch is traced back to LED and driver sources. This traceability supports long term food processing clients where audits require component origin. See more about process rigor through quality assurance certifications.

Flexible custom mix

Custom IP20 aluminum LED batten light versions can modify color temperature, cable entry, labeling or outer carton to match distributor branding. Many buyers request private label for sales into Europe while keeping China manufacturing to secure price competitiveness.

Integrated category approach

Alongside the present batten, indoor surface mounted bulkhead and panel luminaires can be sourced at back lit LED panel light and at IP65 LED high bay. This keeps design language consistent.

Delivery and packaging assurance

Certain lengths are packed 12 or 20 per carton so that overseas buyers can forecast container loads accurately. Cartons are rectangular to protect the aluminum profile and to help pallet stacking in European warehouses.

7. Keep exploring indoor linear lighting made for industrial food chains

Understanding fixture structure, thermal path, driver choice and through wiring logic is the first step toward smarter sourcing in indoor processing facilities. Review related waterproof and tri proof ranges to build a complete offer for your market.

IP20 Batten Series
Installation Guide

8. Questions about IP20 aluminum LED batten light from global buyers

What length and wattage options are available

The series offers 600 mm 20W, 1200 mm 35W and 1500 mm 50W so it can replace most fluorescent battens in existing industrial ceilings without changing bracket distances.

Is the product suitable for washdown meat or seafood rooms

No. The batten is IP20 which means it suits dry or protected indoor areas. For washdown or heavy condensation zones buyers should select IP65 IP66 tri proof luminaires from the supplier portfolio.

Can the fixture be supplied as an OEM private label for Europe or Middle East

Yes. Most China manufacturers that work with aluminum battens support OEM service including label, carton, paperwork and packing format so that distributor branding can stay dominant while the technical core remains stable.

Buyers often test samples under different voltage and temperature before confirming bulk orders which is a useful practice for regions with high grid fluctuation.

How is the fixture wired in long production corridors

The model shown in the wiring image supports through wiring so installers connect line, neutral and earth in one end and continue to the next batten using matching connectors. This reduces ceiling junction boxes and improves appearance.

What drivers are usually chosen for this batten

The specification uses PHILIPS driver brand to guarantee long life and safety so most OEM buyers keep that configuration. It also simplifies spare part stocking.

Does the batten work in cold storage transfer rooms

Operating temperature from minus 40 degree to plus 40 degree means it will operate reliably in many refrigerated transfer areas as long as moisture does not condense directly on the luminaire.

Why choose IP20 aluminum body instead of plastic

Aluminum channels give better thermal path, higher mechanical strength and a more premium surface for corporate or technical interiors. In food processing zones aluminum also resists accidental tool hits.

Can it be combined with high bay or panel lights in one project

Yes. For higher ceilings or warehouse aisles use LED high bay. For administrative rooms or clean offices of the same plant use LED panel light. Using one supplier for all three categories ensures uniform color temperature.

Most industrial lighting buyers keep a record of all drivers, LEDs and carton codes per batch so they can compare performance during warranty which is another common SEE experience expression in this sector.

How to maintain surface cleanliness in food related facilities

Use a soft dry cloth or slightly damp cloth without aggressive chemicals so that the diffuser stays clear. Inspect cable entries and glands periodically especially in areas with temperature cycling.

Where to learn more about tri proof and outdoor grade luminaires

Explore the industrial waterproof category at LED tri proof luminaire light to compare protection levels and choose the right model for harsher rooms.